辉县部分景区地质灾害危险性评估及防治措施研究

为了给辉县景区减灾防灾提供地质依据,根据实际工程概况,研究了辉县部分景区地质灾害危险性预测评估及防治措施,预测评估了工程建设中、建设后可能引发或加剧地质灾害危险性,建设工程自身可能遭受已存在地质灾害危险性;评估了地质灾害危险性综合分区以及根据地质灾害危险性、防治难度和防治效益,对评估区适宜性作出评价,提出了防治地质灾害的措施和建议。     

铅锌多金属矿分段浓缩选别技术的研究与应用

通过多碎细磨、原矿分级溢流优先浓缩脱水,进行了高浓度选铅银、选锌,锌尾矿再浓缩脱水选硫、选锰,同时匹配合理的选矿药剂,原矿浓缩水回用于磨矿分级和选铅,锌尾浓缩水回用于选锌,尾矿浓缩水回用于选硫、选锰,剩余各种废水经适度处理回用于选铅和磨矿分级等,使一段磨矿细度-74μm从70%提高到80%,铅、锌、硫入选初始浓度分别提高到50%、40%、50%,选矿废水全部分质回用。铅锌硫银回收率分别提高了1.5、2.83、13.57、1.01个百分点,硫精矿主品位从38.9%提高到46.5%,设备减少40%、能耗降低25%,节约了选矿药剂消耗和废水处理费用,实现了铅锌多金属矿产资源的高效回收和节能环保。     

单一低渗透突出煤层水力冲孔工艺优化应用分析

为了有效提高单一低渗透突出煤层的瓦斯抽采效率，以高压水射流冲击理论为指导，针对平煤股份八矿己组突出煤层特征建立数值模型，模拟分析水力冲孔应力分布规律，通过现场实测分析冲孔有效影响范围，进一步优化设计冲孔参数、指导现场施工。现场应用表明，水力冲孔是一种行之有效的方法，对单一低渗透突出煤层实施水力冲孔卸压增透、提高瓦斯抽采效果具有重要意义。     

Inhibition of stress corrosion cracking in 304 stainless steel through titanium ion implantation

The effects of titanium ion implantation on the stress corrosion cracking (SCC) behaviour of 304 austenitic stainless steel were studied. Slow strain rate tests (SSRTs) were conducted on 304 steel in air and in 5?wt-% NaCl solution. The microscopic effects of ion implantation were evaluated by Stopping and Range of Ions in Matter Procedures (SRIM). Fracture morphologies and microstructures were investigated by scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The fracture surfaces illustrate that ion implantation significantly inhibits the corrosion pits that initiate SCC. A dense passive film, which inhibits SCC, was formed during the ion implantation process. SCC initiation was restrained due to the dense dislocation nets that were generated by titanium ion implantation.

Highlights

• Ion implantation inhibits SCC susceptibility.

• The lack of Cr at the grain boundary leads to the expansion of SCC along the grain boundary.

• Implantation-induced damage leads to high-density dislocations.

• The surface was amorphised due to high-density dislocations.

     

煤层顶板硬岩大直径定向钻孔施工关键技术

根据顶板高位定向钻孔快速钻进成孔与工作面卸压瓦斯高效抽采治理需要，针对现有螺杆马达定向钻进技术与分级扩孔方法存在的问题，开展了顶板硬岩定向钻进与大直径扩孔钻进关键技术研究，开发了冲击回转定向钻进技术、扭冲回转定向钻进技术、扭冲旋转扩孔技术以及双级双速扩孔技术等钻孔提速新技术，研制了冲击螺杆马达、矿用小直径扭力冲击器、双级双速螺杆马达、组合式扩孔钻头等配套钻具。综合试验结果表明，硬岩定向钻孔平均机械钻进效率达到8.34 m/h，最高达到13.6 m/h，较常规螺杆马达定向钻进技术提升20%~30%；硬岩大直径扩孔终孔直径达到200 mm，机械钻进效率平均达到5.6 m/h以上，最高达到10.5 m/h。该技术提升了顶板硬岩定向钻进效率与大直径扩孔钻进效率，缩短了顶板高位定向钻孔的综合施工周期，为大直径高位定向长钻孔快速成孔与高效抽采治理回采工作面卸压瓦斯提供了可靠的技术手段。     

宁夏红寺堡盆地隐伏古隆起成因机制及其对区域沙漠化的影响

目前对于青藏高原东北缘活动构造研究多集中于活动断裂带的活动性,而对夹持于其间的沉积盆地构造格架及活动性研究甚少。以夹持于烟筒山断裂与牛首山—罗山断裂之间的宁夏红寺堡盆地为研究对象,采用重力资料重处理解译、音频大地电磁测深(AMT)和地震勘探相结合,揭示红寺堡盆地隐伏构造特征,并进一步采用盆山一体化思路分析隐伏构造的成因机制及其对区域沙漠化的控制作用。结果表明:青藏高原在中新世末发生强烈的NE向推挤、扩展和隆升,红寺堡盆地由坳陷盆地转变为挠曲盆地; 在青藏高原NE向扩展的影响下,烟筒山断裂发生强烈的逆冲作用,古生代—中生代基底逆冲于古近系—新近系之上,受构造变形影响的最新地层为中新统彰恩堡组; 红寺堡盆地内的隐伏古隆起呈NW—SE向,与烟筒山构造带具有相同的构造动力学背景,受青藏高原NE向扩展影响形成于中新世末,并且至今仍具有活动性; 隐伏古隆起周缘断裂的活动破坏了地表稳定性、蓄水能力和地表植被,导致区域沙漠化呈现有规律的NW—SE向带状展布。该研究成果对于宁夏红寺堡盆地区域稳定性评价及沙漠化的综合治理具有现实指导意义。     

Fabrication and mechanical properties of large-scale SiC impeller via vacuum gelcasting and pressureless sintering

Impeller is the key part of centrifugal pump to convey liquid. And combined with the engineering practice, we fabricated two types of open and semi-open SiC ceramic impellers with diameter of 100 mm and 160 mm via gelcasting and pressureless sintering. B4C and C were used as the sintering additives and sprayed drying granulation method was adopted for the starting SiC powder processing. Given the size and shape complexity of impeller, the optimized pH value, dispersant content, and solid-loading content for the fabrication of the SiC impellers were determined to be 10-11, 0.8 wt%, and 40 vol%, respectively. For the open impeller, blade height, cover board thickness, drying shrinkage, and sintering shrinkage are 10.5 mm, 4 mm, 10.3%, and 21.3%, respectively. For the semi-open ones, the corresponding parameters are 41 mm, 10 mm, 10.3%, and 21.3%, respectively. The average density of the two types of impellers is 3.15 g/cm3, and the mechanical properties of both impellers, including average hardness, flexural strength, compressive strength, and fracture toughness are 2478 HV, 436 MPa, 2093 MPa, and 3.17 MPa·m1/2, respectively. All variation coefficient values are smaller than 5%, which indicates a good uniformity in densities and mechanical properties of both the impellers.     

Genes Identification,Molecular Docking and Dynamics Simulation Analysis of Laccases from Amylostereum areolatum Provides Molecular Basis of Laccase Bound to Lignin

An obligate mutualistic relationship exists between the fungus Amylostereum areolatum and woodwasp Sirex noctilio. The fungus digests lignin in the host pine, providing essential nutrients for the growing woodwasp larvae. However, the functional properties of this symbiosis are poorly described. In this study, we identified, cloned, and characterized 14 laccase genes from A. areolatum. These genes encoded proteins of 508 to 529 amino acids and contained three typical copper-oxidase domains, necessary to confer laccase activity. Besides, we performed molecular docking and dynamics simulation of the laccase proteins in complex with lignin compounds (monomers, dimers, trimers, and tetramers). AaLac2, AaLac3, AaLac6, AaLac8, and AaLac10 were found that had low binding energies with all lignin model compounds tested and three of them could maintain stability when binding to these compounds. Among these complexes, amino acid residues ALA, GLN, LEU, PHE, PRO, and SER were commonly present. Our study reveals the molecular basis of A. areolatum laccases interacting with lignin, which is essential for understanding how the fungus provides nutrients to S. noctilio. These findings might also provide guidance for the control of S. noctilio by informing the design of enzyme mutants that could reduce the efficiency of lignin degradation.     

载铜树脂处理高含盐氨氮废水的性能

针对高含盐氨氮废水，选择具有不同功能基团的树脂为载体，进行负载Cu2+改性制得载铜树脂并对其处理高含盐氨氮废水的性能进行研究。在筛选出最佳载铜树脂的基础上，研究pH及Na+浓度、树脂投加量、反应时间对载铜树脂处理高含盐氨氮废水效果的影响，通过对吸附氨氮前后的载铜树脂进行SEM和EDS表征分析并构建吸附动力学模型以进一步探究配位吸附的过程。结果表明，Cu2+可与螯合树脂D751稳定结合且在宽pH值下均表现出耐盐性和良好的氨氮吸附效果；在室温(25℃)、pH=11及Na+浓度4 g/L、树脂投加量8 g/L、反应时间60 min的条件下，D751载铜树脂对氨氮的去除率为34.8%。D751载铜树脂吸附氨氮后其表面出现明显的晶状结构物质，该物质可能为铜氨络合物。D751载铜树脂对高含盐氨氮的吸附符合准二级动力学模型。     

起重机械防碰装置试验系统的设计

防碰装置是起重机械重要的安全防护装置,其性能质量直接关系到人员和设备安全。常规的防碰装置性能试验方法难以保证试验数据的精度和可靠性。针对防碰装置的工作特点和试验要求,从试验原理、系统结构、运行逻辑等方面入手,设计一套能模拟防碰装置实际运行工况,自动进行性能试验和数据采集处理,精度高、重复性好的试验系统,可以有效提升防碰装置检测能力。